Night Flasher | LED Aviation Light Bird Diverter | LED Bird Diverter | Illuminating Bird Diverter

Indolite is a technologically progressive organisation, focussing on inventing solutions for Co-Existence of Humans With WildLife and Aviation Safety. We have over 20 patents in hand and many more in pipeline.

Our state of art product, IndoDivert - Night Flasher warns pilots & birds about obstruction in their flight path..especially power transmission lines.

This matchless product is light in weight and is installed on power lines at an average gap of 10 meters. This is tested to withstand pull load of more than 100kgs.
IndoDivert - Night Flasher successfully overcomes the limitations of span marker (ball). It comes with red and yellow Sun/ Moon light reflectors and LED lights that flash in blue/ red and white colour.

Night Flasher is visible at night and doesn't merge with ambience of sunrise or sunset, which is a major limitation with spam marker. Besides LEDs, its body glows in the dark and boosts visibility even in low light, fog and snow. Moreover, it operates on solar cells which can run for 72 hours even during snow and low sunlight conditions.

Placement of Solar Cells:

IndoDivert-Night Flasher is very intelligently designed, ensuring..
  • maximum visibility
  • contrasting coloured LEDs on both faces

DESIGN COMPARISON


IndoDivert-Night Flasher Model: NF-v1Other Manufacturers
LED module is placed in the direction facing flight.
          

LED module is placed facing sky.
 

All six LEDs are visible to approaching bird/ aircraftOnly one-sided LEDs are visible to approaching bird/ aircraft
Contrasting colour LEDs on both faces draw maximum attentionOnly one coloured LEDs.
LED modules position designed to prevent deposit dust or snow on it.LED Module facing sky will assist in holding dust and snow on it.
This will block sunlight on solar panel, hence battery will not charge… consequently resulting in failure of product.

INSTALLATION: Can be installed using UAV, Hot Stick, Manual and automatic trolley.

This Model is Approved by: -
  1. M/S Power Grid Corporation of India Limited
  2. M/S Tata Projects Limited
VIDEO SHOWING IndoDivert-Night Flasher WORKING IN DARK


Comparison – Night Flasher V/S Aviation Warning Ball

FEATURE                                     
MOVING VS STATIONERYIndoDivert , - Night Flasher


DUE TO SWAY, SWING & SPIN MOVEMENT OF WARNING DISK, IT GETS NOTICED FROM A GREAT DISTANCE, HENCE PROVIDES SAFETY FROM GREAT DISTANCE.
WARNING BALL/ MARKERS ARE STATIONERY OBJECTS.

NATURE HAS DESIGNED EYES NO NOTICE MOVING PARTS MORE FAST AS COMPARED TO STATIONERY OBJECTS
REFLECTIVE AREASIZE OF INDODIVERT DISK IS SUFFICIENTLY BIG (9”)… TO BE NOTICED EASILY FROM OVER 1km

MOVING, SWAYING AND SPINNING NIGHT FLASHER DRAWS MORE ATTENTION.
DIAMETER OF BALL IS APPROX. 20 INCHES- ... DUE TO WHICH TOLLS HEAVILY ON CONDUCTOR.
LONGEVITYROTATIONAL MOVEMENT IS ASSISTED WITH MAINTENANCE FREE, SELF LUBRICATING BEARINGS FOR LONGEVITY AND PRECISION.

DURING SWING & SWAY MOVEMENT, ONLY STAINLESS-STEEL PARTS COME IN CONTACT WITH EACH OTHER, WHICH ARE DESIGNED TO GENERATE MINIMUM FRICTION.
THIS INCREASES LIFE.
TOTAL LOAD IS BORNE BY CLAMPS, JOINTLY HOLDING CONDUCTOR AND BALL.

THIS CAUSES EXTREME STRESS IN THAT AREA, WHICH SOMETIMES LEADS TO BREAKAGE.
VISIBILITYNIGHT FLASHER HAS LARGE REFLECTORS, WHICH REFLECT SUN , MOON AND AVIAN LIGHT.

THE DISK GLOWS IN DARK.

GLOW IN DARK FEATURE IS EMBEDDED IN POLYMER DURING MOULDING HENCE WORKS FOR YEARS AND YEARS
MARKER BALL BEARS FLUORESCENT COLOURS.



FLUORESCENT COLOURS ARE NOT VISIBLE DURING NIGHT. HENCE, DO NOT HELP IN WARNING DURING DARK
WEIGHTWEIGHT OF ONE DIVERTER IS APPROX. 1150GMS.

IN A SPAN OF 300 METERS , APPROX 28 DIVERTERS ARE TO BE USED. OVERALL LOAD ON CONDUCTOR IS MERE 21 Kgs

BIRD FLIGHT DIVERTER IS DESIGNED TO DISSIPATE ENERGY WHICH STOPS WIND LOAD TO PASS ON TO CONDUCTOR
WEIGHT OF ONE SPHERE IS APPROX. 5KGS.

IN A SIMILAR SPAN, LOAD ON CONDUCTOR IS 100 KGS. HENCE LESS NUMBERS OF SPHERES ARE USED.

SAFETY IS COMPROMISED TO FOR WEIGHT.
CONSTRUCTION MATERIAL METALALL METAL PARTS USED IN NIGHT FLASHER ARE CORROSION FREE.

VERY HIGH TENSION TITANIUM/ SS-304 SPRINGS ARE USED, FOR UNIFORM GRIP
GALVANIZED BOLTS USED TO COUPLE BOTH PARTS OF SPHERE
CONSTRUCTION MATERIAL POLYMERSVERY HIGH QUALITY POLYMERIC MATERIAL IS USED TO MANUFACTURE NIGHT FLASHER PARTS.

CLAMP OF NIGHT FLASHER IS MANUFACTURED USING ENGINEERING PLASTIC WHICH CAN WITH STAND CONDUCTOR TEMPERATURE FROM -20°C TO + 100°C

DISK IS MANUFACTURED USING MATERIAL WHICH IS UV STABILIZED AND SELF LUMINESCENT AND GLOWS DURING DARK.
MADE USING ABS OR FIBRE

NOT SELF LUMINESCENT

FLUORESCENT PAINT COATING
EFFECT OF WIND & STRESS ON CABLESSINCE NIGHT FLASHER IS DESIGNED TO ROTATE, SWAY & SWING, IT IMMEDIATELY DISSIPATES THE PRESSURE CAUSED BY WIND, THUS STRESS ON CONDUCTOR IS NEGLIGIBLEBECAUSE OF BULKY SHAPE AND STATIONERY DESIGN, CAUSES EXCESSIVE LOAD AND STRESS ON CONDUCTOR, SPECIALLY DURING HIGH WIND PRESSURE.

  TEST REPORTS by GOVERNMENT APPROVED LABORATORY 

DIMENSIONS TEST REPORT



CLAMP GRIP TEST

NON-CONDUCTIVE CLAMP 

ILLUMINATION TEST


APPROVAL CERTIFICATE

M/s Power Grid Corporation of India Ltd